How I Achieved Maximum Success with Cutting

The Benefits of Cutting Substances With Waterjet Cutting

Waterjet cutting is one of the methods applied for cutting of metal and other substances in an industrial setup. It involves the use of a high-pressure water jet in combination sometimes with plasma or oxy-fuel cutting. The waterjet machine cuts with a high degree of accuracy and this produces a very clean cut. This the reason why it is normally preferred for cutting of materials that require minimal damage to the cut parts, and also where wastage of material is undesirable especially if such material is expensive. Industries that need to cut through metals and other hard materials to manufacture and fashion products normally use waterjet cutting. This cutting method has numerous advantages over other traditional cutting methods. Here are some benefits of cutting substances using a waterjet cutting machine.

The heat aspect associated with many cutting methods is absent from waterjet cutting. Most of the traditional methods of cutting hard materials such as metal normally uses heat. It’s the high temperatures produced by the heat that can even melt metal and cause it to separate at the point where it is applied. Heat may destroy the material being worked on if the material cannot withstand high temperatures. These delicate materials can easily be damaged by the heat, meaning that you cannot use them anymore. Pressure, rather than heat, is the principle on which waterjet cutting operates, meaning it can be applied to such materials.

There’s very little wastage of material because it has a very high precision of cutting. Waterjet cutting is a precision cutting method. The waterjet machine makes cuts in the material which are very narrow in width, sometimes under a millimeter. As compared to other methods of cutting, very little of the material is treated as waste after cutting. The level of precision involved can even be improved more by the use of highly advanced computer technology.

Various materials can actually be cut using the waterjet method. Heat generation accompanies the other methods of cutting such as plasma and laser cutting. Because of this, they cannot be used on materials that are either soft or fragile. Waterjet cutting, on the other hand, can be used for cutting all types of material, making it a truly versatile method of cutting substances.

The other benefit of using waterjet cutting is the fact that it leaves very little debris after cutting. It is usually necessary to carry out an extra cleaning process on the surface cut by other methods because such surfaces are usually deformed and bent sometimes. Conversely, surfaces cut with a waterjet machine hardly need any extra finishing due to the fact that they are normally as clean as they can get. The cleanup work is therefore considerably reduced, meaning that the industry can commit labor to other productive tasks.

5 Takeaways That I Learned About Equipment

Overwhelmed by the Complexity of Equipment? This May Help

Leave a Reply